1971-75 Pinto & Mustang II Tune-up Specifications

PINTO * MUSTANG II

1971-75 Tune-up Specifications

Year	Engine or Car Model	*Spark Plug Type (A)* - Gap**	Point Gap	Dwell Angle	Firing Order	Ignition Timing (BTDC or Mark)1	Hot Idle 3
Year	Engine or Car Model	*Spark Plug Type (A)* - Gap**	Point Gap	Dwell Angle	Firing Order	Ignition Timing (BTDC or Mark)1	Std. Tran	Auto Tran 2
1971	4-98 1600cc	AGR-22/.030	.025	38-42	1243	12°	800/ 500	-
1971	4-122 2000cc	BRF-32/.025	.025	38-42	1342	6°	750	650D
1972	4-98 1600cc	AGR-22/.030	.025	36-40	1243	12°	900/ 500	-
1972	4-122 2000cc	BRF-42/.034	.025	36-40	1342	6° 4	750/ 500	650/ 500
1973	4-98 1600cc	AGR-32/.034	.025	36-40	1243	12°	900	-
1973	4-122 2000cc	BRF-42/.030	.025	37-41	1342	5	750	650
1974	4-122 2000cc	BRF-42/.034	.025	35-41	1342	6°	750	650
	4-140 2300cc	AGRF-52/.034	.027	35-41	1342	6°	850	750
	V6-171 2800cc	AGR-42/.034	.027	35-41	142536	12°	750	650
1975	4-140 2300cc	AGRF-52/.034	-	-	1342	6	850	750D
	V6-171 2800cc	AGR-42/.034	-	-	142536	7	850	700D
	8-302 8	ARF-42/.044	-	-	15426378	6°	-	700D

A- Autolite

1- BTDC - Before top dead center

2 - D- Drive     

3 - Head light highbeams on and A/C off
where two speeds are listed, lower speed
indicates solenoid disconnected.

4 - CA with auto trans 9°

5- Auto trans 9°,
Manual trans 6°

6 - Exc CA auto trans 6° BTDC
CA auto trans 10° BTDC

 7- Manual trans 6° BTDC, 
Exc CA auto trans 10° BTDC
CA auto trans 8° BTDC

8- See ford & Mercury service
procedures